Lanz Bulldog Tractor For Sale

German Bulldog Tractor manufactured by Heinrich Lanz for Sale

The owner of the tractor has asked us to publish this advertisement - please contact him for more details:

Darryl Pearce
Ph: 07 5486 7419
Mob: 0438 794 166

We believe that this German built tractor was imported to Australia in the 1950's. The Lanz Bulldog is in good order and was still being used as a farm tractor up until about 3 years ago.

Details we have are (taken from the serial plate - see photo below):

Manufacturer: Heinrich Lanz - Mannheim AG
Tractor Type: H
Serial Number: 553565
RPM: 1050

Lanz Bulldog Tractor Photos

We have been very fortunmate to obtain the following information form Alex Lange of the Lanz Bulldog Forum:

This export Model Type H is the german Type D2416 with a 2-stroke full diesel engine. "Drehzahl" means engine RPM. So this tractor has 24 HP at 1050 rpm!
It is probably built 1956 according to your serial.
you can find a datasheet here: http://www.heinrich-lanz.de/downloads/volldiesel/TechnDaten2416_2816_4016.pdf
Here a short translation:
Type: D2416

HP: 24
Bore: 140 mm
Stroke: 170 mm
Displacement: 2616 cm³
rpm idle: 500 rpm
rpm full throttle: 1050 rpm

Injection pressure: 120 bar
Injection angle before top dead centre: 20 - 24 °
Fuel consumtion: 179 grams per HP and hour

Axial clearance of big end bearing: 0.14 - 0.19 mm
Clearance between cylinder head and Piston: 0.78 - 1.5 mm

Battery: 12 V/56 Ah

Gearbox
1. Gear: 2.5 - 3.5 km/h
2. Gear: 3.8 - 5.4 km/h
3. Gear: 5.4 - 7.5 km/h
4. Gear: 6.8 - 9.4 km/h
5. Gear: 10.35 - 14.30 km/h
6. Gear: 14.4 - 19.5 km/h
1. Reverse: 4.85 - 6.7 km/h
2. Reverse: 13.0 - 17.8 km/h
power take-off: 558 rpm

Size:
Length: 2800 mm
Breadth: 1667 mm
Height with roof: 2300 mm
Height without roof: 1890 mm
Ground clearance: 465 mm
Wheelbase: 1770 mm
Turn raduis: 2700 mm
Weight: 1490 kg
Track: 1275 - 1527 mm
Tires Front: 5.5-16 or 4.5-16
Tires Rear: 8-36 or 10-28
Powerlift pressure: 120 bar

Cooloolabusiness.com is acting on behalf of the owner of this historic tractor which is now a much sought after collectors item. The owner has expressed a desire to sell the Lanz back to a collector in it's country of manufacture - Germany. Enquires from collectors interested in purchasing the Lanz should contact it's owner:

Darryl Pearce - Gympie, Australia.
Ph: 07 5486 7419
Mob: 0438 794 166